Thursday, May 21, 2015

Optimizing the Psychic Phase



I have had a request for information comparing psychic shooting and traditional shooting.  As I was working the probabilities I thought to myself, "Oh the number of warp charges per power easily falls into a game theory problem.  That means it can be optimized!"  Instead of the planned 'psychic shooting vs traditional shooting' I give you 'How you should plan your psychic phase.'

I have one fairly large assumptions in all of my calculations: All powers of the same level have the same value.  What I am going to show is how to cast (on average) as many powers as possible.  The assumptions are there because if we start to argue over "Invisibility is clearly better than prescience" all of the math is out the window.

These concepts are especially important for armies such as Daemons or Grey Knights where you are likely to have many psykers who all have the same power.  Daemons may not care which psyker manages to cast summon, but they want to maximize the total number of successes.

Warp Charge 1 Powers:
Fortunately this is the simplest situation.  Give each power an equal (or as close as possible) amount of dice.  This is always going to be your best option when compared with putting all of your dice on a single power.

Warp Charge 2 Powers:
Moving from warp charge 1 to warp charge 2 makes things a bit more interesting.  You are going to want to cast multiple powers, but you are going to want to have a minimum of 3 warp charges for each power before attempting to cast an additional power.  For instance if you have 6 warp charges you could cast up to three warp charge 2 powers, or you could dump all your dice into one power to try and make sure it goes off.  The most advantageous option is actually to attempt to cast two powers with three dice each.

*Math recap: Expected average or expected value is the average number of successes over an infinite period of time.  The expected average of the number of 6's in a roll of 10 dice 1/6*10 or 1.667.  While it is impossible to get exactly 1.667 sixes this is the theoretical average.*

Throwing all six warp charges at one power will successfully cast 89.06% of the time, so an expected average of 0.8906.  Trying to cast 3 powers will yield an expected average of 0.5781; much lower than only attempting one power.  The magic (zing!) happens when we attempt to cast only two powers.  In this situation we end up with an expected average of 1.  There is a 50% chance of casting exactly one power and a 25% chance of casting two powers, so 0.5*1+0.25*2=1

A caveat though is that you don't want to add an additional power until you can give that power 3 dice.  So with 6 warp charges you will aim for 2 powers, same with 7 and 8, but once you hit 9 warp charges then you should start aiming for 3 powers.

Warp Charge 3 Powers:
Warp charge 3 powers are similar to warp charge 2 because there is a threshold where it is better to spread out your dice rather than concentrate on a single power. With warp charge 3 we want a minimum of 5 dice per power, so if you have a total of 9 warp charges then you want to throw them all at one power, but as soon as you have 10 it is better to try and cast 2 powers with 5 dice each.

A Mixed Bag of Tricks:
Up until this point we have only been dealing with powers requiring the same number of warp charges, but this is a rarity.  Usually you have a handful of powers and a mix of warp charge 1, 2, and 3.  This becomes trickier because all of a sudden we have to place value on our powers.  I feel like there are two main ways to think about things.

The first way of comparing powers is to simply say a warp charge 2 power is worth twice as much as warp charge 1, and a warp charge 3 is worth three times as much as warp charge 1.  When using this weighting system it is always best to cast as many level 1 powers as possible.  The result is a bit clunky and one sided since it is never in your interest to try and cast anything other than level 1 powers.

The way I feel is more appropriate is to say a warp charge 2 ability is worth three times as much as a warp charge 1, and a warp charge 3 is worth five times as much as a warp charge 1.  These were the break points for warp charge 2 and 3 abilities, but these were also the number of dice needed to get the probability of success up to 50%.  The result is that the 'value' of casting three warp charge 1 abilities is the same as a single warp charge 2.

For example if I have 6 warp charge dice, I could cast two warp charge 2 abilities, one warp charge 2 and three warp charge 1, or six warp charge 1 abilities and they would all have the same expected value.  The key with this is you want to 'complete whole powers'.  With what has been previously established it takes 1 warp charge to complete a level 1 power, 3 warp charges to complete a level 2 power, and 5 warp charges to complete a level 3 power.

As long as we split our warp charges into groups of 5, 3, and 1 we will be working with ideal results.  Eight warp charges could be split into 5 and 3, or 3, 3, 1, 1, or any other combination of 5, 3 and 1.  Groups of 2, 4, or anything else will yield less than ideal results.  It may not always be possible to end up with every group being 1,3, or 5 simply because of the powers you can cast, but that would be the point where you start boosting up your powers.

For instance if your one psyker has a level 1 power and two level 2 powers and you have 8 warp charges to spend then things aren't going to work out evenly.  You can allocate 1, 3, and 3 warp charges respectively, but that still leaves you with one left over.  This last charge should just be used to boost up whichever power is most important.

Denying the Witch
Optimizing your deny the witch rolls work similarly to casting powers, but the break points are much higher.

If your opponent only has 1 success then only use one die to try and deny the power.  Most mastery level 1 powers aren't that big of a deal, so don't commit too much to them because...

When dealing with 2 successes your chances of denying become exponentially smaller.  In fact you need to be able to commit a full 8 dice to attempt to deny two successes.  Just as before this is a break point, so with 15 dice you still want to throw everything at canceling one power, but once you hit 16 dice then it is better to try and cancel two powers.  Most armies can't muster this, so people are generally stuck throwing all of the dispel dice at a single power.

Three successes becomes even more difficult, and the threshold is 15 dispel dice!  If you manage to get 29 dispel dice you should still throw them all at a single power because you should only attempt to dispel two powers once you have 30!  Once again, this threshold is so high that if you want to cancel out three successes then you are more or less going to be throwing all of your dispel dice at a single power.

I know some of you are thinking, "But you won't know how many successes your opponent has until they try and cast their power."  True, but knowing the volumes of dice needed to cancel two or more successes means you have a decent idea when to let a power go through or when to try and cancel.

Putting it All Together

Previously I had not put a lot of thought into how I planned out my psychic phase.  I had thrown a handful of dice at whatever power I wanted, but now I am going to be more deliberate in my actions.

Aside from planning your psychic phase you can also use this information to help plan your army.  If you want to build a summoning army  I would probably aim for having 11+ mastery levels to generate warp charges.  At 11 automatic charges you have a 50% chance of rolling enough to cast three summoning powers a turn.  This won't happen all of the time, but then you can buff up your two powers that you will always have available.

I hope this has been helpful.  This was something I hadn't seen a lot of talk on, but hopefully this was as enlightening for everyone else as it was for me.

**Edit: Special Cases**

 First up for our special cases is re-rolling failed dice when harnessing warp charges.  With re-rolling the chances of success for each individual dice increases to 75%.  Your strategy for warp charge 1 powers isn't going to change because you should have been trying to cast as many powers as possible to begin with.    The threshold for warp charge 2 powers is now gone and you should be good to go with casting powers with only two dice.  Warp charge 3 powers do still have a threshold, but it drops down to four dice.  This means that when you have a total of eight dice it is better to cast two powers rather than one.

Casting on a 3+ seems to have cropped up a couple of places, and so there have been a few requests for this information as well.  Just as before the strategy for warp charge 1 powers doesn't change, but they do have increased chance of success.  Warp charge 2 powers get interesting because the expected value of using four dice to cast one power is exactly the same as trying to cast two powers with two dice for each.  This means that it is up to you whether or not you want to try and go for that extra power; over a long enough period of time the results should be the same.  Warp charge 3 powers will have a threshold of four dice just like in the previous situation.

The strategies for these two situations are nearly identical, but having a re-roll on individual dice is going to have a higher chance of casting powers rather than casting on a 3+.

**Edit: Flickering Fire**

Flickering fire is an interesting power because you can increase the warp charges needed in exchange for increasing the number of shots.  Let's look at two situations.

In warp charge 1 form flickering fire gives you 2D6 shots per warp charge, in WC2 form it gives 1D6 per warp charge, and in WC3 form it gives (4/5)D6 per warp charge.  This means that if you have a large number of flickering fires then it is always going to be most efficient to cast as many as possible.


If for instance you only have one flickering fire and want to optimize your chances of success vs number of shots then things work a bit different.  When you have three or fewer warp charges you want to cast a level 1 version, with 4-6 warp charges cast the level 2 version, and with 7+ warp charges cast the level 3 version.

17 comments:

  1. Would you be interested in tackling the probabilities behind reroll ing individual dice within a psychic test? For Chaos, we are primarily concerned with the Death of Kasyr Lutien, but Runes of the Farseer also allow for such shenanigans.

    ReplyDelete
    Replies
    1. Yes. I did most of these calculations while my students were taking their finals, but now the students are done, and I have much more free time.

      I know how the spell familiar works, but do the runes of the farseer work the same?

      Delete
    2. Things turned out to be fairly simple. With re-rolling the chances of harnessing warp charges increases to 75%.

      This doesn't change the plan for warp charge 1, because you should have been casting all your powers anyway.

      The threshold for warp charge 2 powers is gone, and you should always be good to go with a minimum of two dice.

      Warp charge 3 powers do have a threshold, but it drops down to 4 warp charges. This means that with a re-roll it is more efficient to try and cast two powers when you have eight warp charges rather than one power without the re-roll.

      In case anyone was unaware. Spell familiars are possibly the best upgrade in the entire game.

      Delete
  2. Thank you again for your work.
    The most interesting thing is that if you have 2 caster that can cast the same important spell, the best thing is to divide the dices between them.
    On the other hand, the assumption that you can give a value to the power based on the WC level, it is a bit too far from my game experience.... For instance, a lv 1 power that gives stealth and shrouded can be of vital importance, or completely useless.... in the game we have to make choices, and usually one power or two can have a great influences on the game, and we care less for all the others powers that our casters knows.
    So I try to use a number of dice that give me about 75-90% of being successful. then I choose another power and so on.

    There is a Formation that give me some problem with this calculation. The Seer formation is made of a minimum of 5 warloks (5 warloks are a lv 2 psyker but they give one dice each) and two farseer (lv 3) for a total amount of 11 dice. The special rule of the formation is that they cast with a 3+ instead of 4+. More than this, the Farseers can do a reroll of a number of dice they like, every phase.
    This calculation for me are not as fast as that one I was used to do before so I think that I will waste a lot of dice... But if I have time I will look for the youtube video that you have posted some month ago to try to understand how to do some exact calculation....

    ReplyDelete
  3. Thanks for a really interesting article! I play Daemons and CSM, so I am usually chucking a lot of psychic dice - this gives me a nice logic to my planning.

    I have previously used a few strong psykers (level 3) in an army casting critical powers to buff my units (shrouded, iron arm, etc.) In my last game I used a lot more level 1/2 psykers spread across the army, using similar dice numbers to above - and it was a lot more effective in shooting.

    Generally, I find that it's best to focus on buffs, summoning, or shooting from the psychic phase. Trying to do a bit of everything means I rarely achieve much.

    ReplyDelete
    Replies
    1. I don't use psychic shooting as often as I should. Most power are so short on range that it just isn't that effective for me. The times I have been able to get my pyromancy sorcerers in range they tend to blow up a lot of stuff.

      Delete
  4. Hi I have a few questions for you:

    1. As I have been playing you can't cast the same spell twice in a unit, so I have just been using one prophet of the voices summoner in a unit of possessed. Adding a second sorcerer would not be able to summon a second time correct?

    2. With spell familiar I have been rerolling the whole failed attempt. 5 dice summon with 2 successes I reroll all 5 right, not just the 3 fails?

    3. Have you heard of the DA librarian formation? I was reading about it on blood of kittens... how would succeeding on a 3+ effect your chances to summon?

    ReplyDelete
    Replies
    1. 1.) Correct

      2.) Only re-roll the failed dice

      3.) I am planning on running the calculations in the next day or so. Keep an eye out.

      Delete
    2. 2. Blew my mind. Now I realize why you said that may be the best upgrade in the game lol.

      3. Thanks!!

      Delete
  5. I have updated the main post with the information I stated on casting with a re-roll on individual dice, and I have also included some new information on casting on a 3+.

    ReplyDelete
  6. Really interesting as always, I love seeing how close my gamers feel for probability is to the actual statistical facts. In this case I've been putting too many dice into casting my powers ;-)
    Keep up the good work.

    ReplyDelete
  7. I'm confused at your conclusion of how many dice to use for each power level. For WC 1 powers, you would roll a single die and it only has a 50% chance of rolling 4+. That means you have as much a chance of failing as you do succeeding. This seems horridly risky. If your nurgle prince's only chance of surviving is to successfully cast iron arm, a 50/50 shot is very risky.

    Given that, do you still recommend using only 1 dice for a 1 WC power?

    ReplyDelete
    Replies
    1. What I am saying is that if the only thing you are concerned with is casting as many powers as possible, then use one warp charge for every power before you start doubling up.

      When you only have one or two psykers who are only concerned with one or two powers this isn't a big deal; however with armies like grey knights and daemons this becomes much more important. A grey knight army isn't going to be made or broken on how many times hammerhand goes off, but they are going to want to try and get as many successes as possible.

      Delete
    2. The reason I inquire with this is I've played mono-tzeentch psychic shooting armies before and I find they lack the firepower to be effective. However, I never did the analysis like this to maximize the effectiveness of the psychic phase.

      I'm curious of the % success chance based on how many dice you throw at the various WC cost powers (I need to refresh myself with your formulas). Like if you cast flicker fire en mass, it may be more efficient to cast it at WC2 cost and use 3 dice rather than WC1 and use 2 dice, for example. Because you have a finite number of units and may have loci heralds duplicating the power in the same unit, I think understanding the minimum WC to spend to have a reasonable success chance is key to maximizing the damage to warp charge ratio for psychic shooting armies.

      Delete
    3. Excellent question! I updated the main post with a section for flickering fire.

      Delete